Tamiya 71118 Rhinoceros Beetle - 2-Channel Remote Control SF_Arduino Accessories This receiver works with 6-pin

This receiver works with 6-pin 1mm pitch JST type cables and connectors which you can find in the _Recommended Products_ section below

All 26 general-purpose I/O lines on the ATmega32U4 are accessible on the A* 32U4 Mini

with no connectors or standoffs included

thinner profile

DFRobot Gravity BME680 environmental sensor provides a Gravity I2C connector

Tamiya 71118 Rhinoceros Beetle - 2-Channel Remote Control SF_Arduino Accessories This receiver works with 6-pinTake control of this six legged walking Rhinoceros Beetle robot via the included 2 channel remote controller. The two controller sticks operate separate gearboxes, enabling forward reverse, and left right movement. How it works The Rhinoceros Beetle is equipped with two gearboxes, one that controls the right legs and one that controls the left legs. While working in the same direction, the gearboxes allow your robot to move forward or backward. While